|
|
| |
|
Welcome to, WE are THE "ORIGINAL" DPR Racing Development
DPR Racing had it's beginnings over 60 years ago, in southern California. Bringing together
yesterdays craftsmanship, with today's technology, DPR Racing produced some of the most amazing engines
and cylinders heads on the market today. DPR Racing has created one of the most recognizable name brands
in the business, and a powerful reputation for quality work in an emerging market. We not only build
racing motors and custom cylinder heads, we've driven our vehicles to new records, worldwide! Others
boast about performance gains, but who else out there, is setting world records, and putting their products to the ultimate test(s)?
(continue...)
|
 5...4...3...2...1...mark! - DPR's owner Dan Paramore, sits atop of a highly modified Honda Valkyrie, about to "launch" at another Land Speed Record, and is about go down in motorcycle history again! 153.98 mph WOW!!!...One of many record setting motorcycle engine combinations, with many competitors, there is only ONE record setter, and we were there to set the record straight....See how they did it! |
|
What's "faster than a speeding bullet, and more powerfull than a locomotive?"DPR's NEW Stage V "SuperCooper™" Head for Mini Cooper "S" R53 Engine's, That's What! Seeing is believing!(...more...) |
Want to know what 206MPH looks like from inside a streamliner?We didn't help build or drive this car, but team USC shows what the Bonneville Salt Flats in Utah, looks like, from a drivers point of view. See how fast you have to go, to peel duct tape off your car.....(Make sure you watch in "HD", FULLSCREEN!!! --- keep your eyes on the piece of duct tape --- LOL ---) a fantastic 206 MPH run down 5 miles of Salt! Great Job, and our congradulations, to the whole USC Engineering team and their driver! (note: It's SO flat our here, you can look at the horizon, and actually see the curvature of the Earth!) |
|
| 
They regrind your seats, jet wash the works, slap in some valves, bang it together and out the door it goes......Or... should you consider, when it comes to a “valve job”, that it is a process not to be taken lightly?
What exactly is a “valve job” anyways? The reliability, durability, and performance that you will (or will not) receive from your engine has everything in the world to do with your cylinder head, and how well it works. The quality of the head work, the components used, the tolerances, cleanliness and procedures will determine whether or not your engine LIVES or DIES! Different makes/models, different experience, and what to spot, is the key to success or failure. See how the Pros do it! |
|
Winter is REAL COOL, and we have some REAL COOL DEALS......that will get you going even faster!!!!!This was the BEST Honda had... Restored Vintage Can-AM Car! 
|
|
|
|
|
 |
25% Off!
IMPROVED PAGES and INFORMATION!
* View/Print how to "break-in" an ENGINE "PDF"!!!
* 6. Check our LINKS to helpful pages, Vendors, Sponsors, Etc.
