Microlon Gun Juice

Dry Film Lubrication
Corrosion Protection
Developed in 1964 for high velocity rifle barrels.
Increases Muzzle velocity
Improves Accuracy

Microlon Gun Juice will provide smoother operation of all moving parts and prevent corrosion. When properly applied to the bore, gun juice will cause a higher muzzle velocity, shoot more consistently and last much longer.

Use Gun Juice on all firearms in place of gun oil. Gun Juice provides superior lubrication and is a dry film that will not attract dirt, dust or grit that can permanently damage a firearm.

Read what they're saying about Gun Juice

How does Gun Juice Work?

Microlon Gun Juice has two major parts. The first consists of a liquid containing 17 different chemical compounds. These compounds remove the contaminates from the pores in the metal surface then treat the exposed metal for corrosion. They evapoate leaving the second part laying on the surface.

The second part consists of millions of particles of Microlon resin. These particles have an affinity for each other and when forced into open pores of the metal the particles weld together forming a resilient film that leaves a smooth lubricated surface. The forcing action is applied by the bullet in the bore of the gun or buffing exposed surfaces or individual gun parts with a soft material.

How to apply Gun Juice

Shake Gun Juice at all times while using, clean & degrease metal before treatment. Shake it every time you pick it up , cap it every time you put it down.

Secure your weapon in a bench rest.
Wet a patch with the gun juice and swab the bore between firings of the weapon until the point of impact stops rising on the target. This will indicate that the film has completely formed in the barrel. Or swab and fire gun until maximum velocity is reached as measured by a chronograph.
Gun Juice may be applied to each part of the firearm by polishing the parts with a soft cloth moistened with Gun Juice. A small piece of chamois works perfectly. Repeat this wiping process four times, polish, dry completely, then buff between each application. Forced drying can be accomplished with a hair dryer. During reassembly, you will notice how much smoother the weapon operates. Application of Gun Juice will prevent corrosion.

1 oz of Gun Juice will do a couple of guns depending on size/coverage.
The price for 1 oz is $9.00, 4 oz $30.00 (plus shipping)

Sportsman Kit:
1 oz of Gun Juice plus a 3/4 oz tube of Assembly Lube.
The price is $17.00 (plus shipping)

See Gun Juice Prices and Ordering for more information

Use Microlon Assembly Lube anywhere a light, friction-fighting grease is needed. Likely examples include, spinning reels, bait casting reels, fly casting reels, outboard motor pivots, electric trolling motor gear boxes, throttle and shift control pivots, etc.

Assembly Lube is dynamite for coating parts and bearings during assembly (engines, gear boxes, differentials, etc.). Microlon Assembly Lube will provide excellent rust and corrosion protection and will not run off during long-term storage and will protect against dry starts when the unit is returned to service.

Prices and Ordering

What they're saying about Gun Juice

"Microlon Gun Juice claims to increase muzzle velocity, improve accuracy and prevent corrosion. And guess what? It does."
Chick Blood, AMERICAN GUNSMITH, Official publication of America Gunsmithing Association, March 2000.

"Microlons Gun Juice lubricant accomplished all that the manufacturer said that it would do."
Glen Voorhees, Jr., Western Division Field Editor Gun Week, May 2001

"I use a Kimber .45ACP, with all the bells and whistles, in competition. With the use of Gun Juice the trigger pull is smooth and consistently 6oz lighter than before, Cleanup is easier and less barrel leading."
Jim Harris, gunsmith & trigger manufacturer. Whitakers, NC

"The Gun Juice treated mold cast perfect bullets. No leading accumulation within the mold. In 8 hours each mold casts 700 bullets lead consistently at 725 degrees."
Montana Bullet Works, Dave Jennings. Owner

"Reduced 100 yard group size by 33 1/3."
Craven County Sheriff Department, NC, Sniper Unit

"First coating to protect my shotguns from salt water corrosion-ever."
Charles "Shill" Grebe-Core, Sound Guide.

"Increased the cyclic rate of my AK?s & SKS?s by 25%."
Len Edwards - avid SKS owner.

"Not only was my muzzle velocity and downrange velocity significantly higher, but my accuracy was even better than expected. I maintained 1/4 to 1/2 inch groups consistently."
(Browning Stainless Stalker 30/06) Gunny Benson, SGT/MAJ USMC ret.

"Thanks for your product. It works! Your Gun Juice is truly a better mousetrap."
W.R. Hambidge M.D., Repairing, Restoring and Rebuilding Fine Firearms, Insurance Appraisals.

"For over three years now my guides and I have been field testing Gun Juice. We use it on all our weapons and Fishing Reels. In our opinion it is by far the best product on the market today. It increases muzzle velocity and smoothes up actions to the finest and our reels are as smooth as glass. I highly recommend it on all your finest play toys. Thank you for your product and I hope to use it for many years to come."
Kim H. Day, Rapid Runner White Water Outfitters, Gold Hill, Oregon

"Other products do not have nearly the benefits of Gun Juice. Corrosion protection for your guns. The velocity is increased noticeably, the ease of cleaning in both the chokes and barrels. Chokes need only finger strength for tightening and removing. Plastic fouling is no longer a problem. It is a worthy investment for an enjoyable shooting experience."
Ed. P. Couture, U.S. ALL AMERICAN TEAM U.S. SUPER VETS TEAM

Back to Gun Juice

Microlon was awarded the "Medaille De Vermeil" at the "Salon Internationale des Techniques et des Idees Nouvelles" in Geneva, Switzerland, This prestigious award representing a first in its class for new product innovation, was presented to Microlon in Geneva in 1978. This is only the 7th time in 100 years the award was made.