DPR - "SuperCooper" Camshaft Specification Card
Part Number: DPR MCR5301
Engine Application: R52 and R53 Only!!!
Grind Number: MCR53011 or MCR53012 Price $1495
MCR53011 - STAGE 3 CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 262 Lift: 5.80 mm Hydraulic Lifters
EXHAUST: Duration: 262 Lift: 6.25 mm Hydraulic Lifters
MCR53012 - STAGE 5 CAMSHAFT SPECIFICATIONS:
INTAKE: Duration: 262 Lift: 5.80 mm Hydraulic Lifters
EXHAUST: Duration: 270 Lift: 6.30 mm Hydraulic Lifters
RECOMMENDED VALVE SPRING INFORMATION:
Part #  DPR PCS Valve Spring Kit (springs & titanium retainers)
- Dynamic spring weight is reduced to an impressive 50% less
than stock. Lightest Subaru Valvetrain kit in the world. Use
for street and racing applications with standard or
hi-performance camshafts. Designed and manufactured exclusively by DPR


 

NOTES:

Cams damaged by excessive spring pressure, over shimming, valve train bind or retainers contacting the guides are void from warranty.Warranty applies to manufacturing defects only. Please refer to terms and conditions page at www.dprracing.com for more warranty information.


 

Stage 1 - Engineered specifically for street use. Bottom to mid range power. Can be used with stock valvetrain with stock rev limit.

Stage 2 - Good top end power without sacrificing low end torque. Upgraded springs and retainers recommended.

Stage 3 - Designed for Steet/Strip use. Slight lope at idle. 1250-8000 rpm.

Stage 4 - Drag race or radical steet strip use. Rough idle. Requires upgraded valvetrain and ECU upgrade. 1500-8500+ rpm.

Stage 5 - Race. Rough idle. Requires ECU upgrade as well as upgraded valvetrain components. 2000-9000+ rpm.